Jump to content

siddav

Members
  • Content Count

    18
  • Joined

  • Last visited

About siddav

  • Rank
    Member

Profile Information

  • Gender
    Male
  1. The rollers on my 120AFC carrier on our 3101 are all gummed up. I have bought replacement roiller kits before from Kanaou but they are out of stock. Anyone have or have any or another source? I am in US.
  2. The last rack (stabilizer) is not mating well with the drive shaft. There is a wobble to the shaft at that end. How do you access or replace the end bearing or the whole shaft on a 3101? The part number, B016875-01 shows the baraings and spiral geastr as an assembly with the shaft. Anyone one have any parts or tips on how to service?
  3. Anyone have a service manual for a Noritsu 3101? Much appreciated. Sid
  4. I appreciate your help but AL4 is a message on a 400 series that indicates drive motor has stopped. There never was a autoloader option on the 400 series, just the V series machines.
  5. I did do a input check and you get a steady beep. Most other checks of set box like cutter and pressure do not work.
  6. I cleaned all sensors. i even swapped the motion sensor with a cut sensor. Still same message.
  7. We are trying to put our Noristu 470BW film machine back in service. On power up we get a "AL4 - Drive motor has stopped" error message and then it follows with film sensor errors. The drive is working perfectly fine. i checked all the fuses & plugs and cleaned all the sensors. Any ideas? Sid
  8. We are trying to put our Noristu 470BW film machine back in service. On power up we get a "AL4 - Drive motor has stopped" error message and then it follows with film sensor errors. The drive is working perfectly fine. i checked all the fuses & plugs and cleaned all the sensors. Any ideas? Sid
  9. siddav

    3101 Dryer error message

    The fan is operating and no obstructions. ill try to read the tempeture when the error happens again. thanks sid
  10. We are getting error message # 5533 dryer heater issue. Does anyone know how to correct? we took rack out looking for paper blocking air flow, etc. Does anyone have a service manual that they can look up this messgae and what to do? thanks sid
  11. siddav

    110 Carrier?

    mostly 4x6 and scans to CD
  12. siddav

    110 Carrier?

    Ok Don't laugh. I am looking for a way to scan & print 110 film on either a Noritsu 3101 or a 3011. Anyone have a carrier they want to get rid of? I am in the US. Sid
  13. Need Parts & Service manuals on 470BW - or 450C41 Having Problems with jumping in dryer. Thanks
  14. We are getting the folloring errors on our 3011: 6107-002 R laser temp 6105-001 B laser 6073-003 Syncronos error Any tips besides spending big bucks on pcbs and lasers? sid
  15. All C-41 Film Film processors will process C-41 film. (thats why you can make reprints from negatives processed elsewhere). But in my opinion, Noritsu makes the most reliable film machines. they use gears to drive the racks where Fuji uses belts. Furthermore, if you have a Noritsu printer it makes the most sense to have a Noritsu film processor to simplify service, parts, and support.
×