Jump to content

JJOpoku

Members
  • Content Count

    13
  • Joined

  • Last visited

About JJOpoku

  • Rank
    Member

Recent Profile Visitors

252 profile views
  1. JJOpoku

    Error Message From The Frontier With Sp 2000

    In addition does anywone know how to bypass the negative scanner of fuji frontier 370 so that I can get rid of this message any time I start the machine; leading to communication error 1472 when I command from the DI. "downloading Carrier Failed restart the system"
  2. JJOpoku

    Error Message From The Frontier With Sp 2000

    Thank you for the reply, Well actually I don't know about FMPC or DIC but what I can tell you now is I am using DI version 4.6 and 7.7 for the printer. So if there is any kind of software that can help me bypass the scanner; because I disconnected the CBT 20 board in order to do away with the scanner but I still have this error after starting up the system " downloading carrier fail restart the system"
  3. we can print condition set up from the sp2000 but when we command from DI it gives error number E-1472 communication error occured between the scanner and printer I dont know what to do because we are not using the scanner any more so can some one help?
  4. JJOpoku

    Need Ms01 Software

    Hi, Does anyone have or knows where I can get the MS01 Fuji Software? My e-mail is jopokuweb6@gmail.com Thanks
  5. JJOpoku

    Need Assistance On Fuji Sp2000

    Can I still print media if I get this error message from the SP2000 because I am no more using the scanner for negative print again [ E-1424 downloading carrier fail restart the system ] I keep on going to connect the DI but when I import the digital print on the printing screen at the scanner side the media print is displayed at the sp2000 computer but printer does not respond to it and still in the standby mode. What should I do to by pass the negative side? And despite all of this, I am only able to print condition set up print from the scanner.
  6. Can anyone help me here? Can I still print media if I get this error message from the SP2000? Because I am no more using the scanner for negative print again (E-1424 downloading carrier fail restart the system), I keep on going to connect the DI but when I import the digital print on the printing screen at the scanner side the media print is displayed at the sp2000 computer but printer does not respond to it and still in the standby mode. What can I do to by pass the negative side?
  7. JJOpoku

    Buying Software For Fuji Frontier

    Is there anyone selling these software "B1, B7, B8, B9, B14" for a Fuji Frontier 350/370?
  8. JJOpoku

    Frontier 350/370 System Disk 7.7

    In case I cannot get the software from my minilab seller, how much would "B1, B7, B8, B9, B14" cost from you?
  9. JJOpoku

    Frontier 350/370 System Disk 7.7

    I am doing a recovery on my 370 and need all of following programs. I need help please. B7, B8, B9,B14, C2,C8,C11,C14,D4, D14, D20, E3.
  10. JJOpoku

    Fuji Frontier 370

    I want to start a new installation on frontier 370 and I was wondering if the following software are enough for everything. i) A1 ii) Variety print service software iii) The DI c4c5. I am asking this because after doing all the necessary installations whilst both computers can communicate properly, I can see the FRONTIER inside and FRONTIER outside and both files can be opened on both computers but the imaging controller cannot be connected at the per-operational checks at the SP2000 and I can never understand it. so can I get any tips?
  11. JJOpoku

    Problem On The Frontier Machince

    After doing all the necessary installations, both computers can communicate properly. Now I can see the FRONTIER inside and the outside FRONTIER and both files can be opened at both computers but the imaging controller cannot be connected at the pre-operational checks at the SP2000. Can you kindly help.
  12. JJOpoku

    C4/C5 Version 5.5 For Windows 2000

    I will do that. Thank you so much for your reply
  13. JJOpoku

    C4/C5 Version 5.5 For Windows 2000

    HI guys. I need some help. Is there any site or place that I can get the C4/C5 software that is a version 5.5 for windows 2000 for my Fuji frontier machine? I would really appreciate it. Thanks
×