Jump to content
Sign in to follow this  
bitania

MS AND FMPC COMPARISON

Recommended Posts

What is the difference between ms and fmpc software?And which one is good regarding quality aspect?With which frontier models do the above software work?What additional software and hardware do need to use fmpc/ms with frontier 340,355,570?Please give full information.Thanks in advance

simon

Share this post


Link to post
Share on other sites

Hi,

MS and FMPC meaned different software. MS is the latest  operating enviroment using for frontier 7xxx series. off-course MS will support other frontier modals also. but can connect thru a FMPC.

FMPC used to isolate (seperate) scanner and printer. you can print digital files without scanner. even scanner is busy also will not affect printing from DI.  scanner and printer connected to a seperate PC .thats FMPC. To make FMPC need  high configuration INTEL computer, two fire wire cards, FMPC software, IEEE cables and EEPROM to fix printer CTL board.

FMPC doesnt make any change in print quality.there is no improvement in quality of print. its just used to increase the productivity of the machine. FMPS support frontier 350,370,355,375,550 and 570.

But MS is excellent in print quality.

reagrds...

Share this post


Link to post
Share on other sites
Guest

Dear Baiju,

Do you have bin file for EE-PROM for CTL Board? If yes , Can you please send to me.

the_spectrum@rogers.com

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...