Jump to content
Sign in to follow this  
onelegman

6800 not cutting

Recommended Posts

They are cheap on ebay.  Could it be the new kits they have out now?  It has been working great till I installed the new white label kit. I did the firmware update.  I got around 50 prints out of it.   Then then the paper cutter quit.

Share this post


Link to post
Share on other sites

PLs use the diagnostic service ti test your cutter.While powering on the printer,pres +/- and menu simultaniously.When Diagnostic apears on the display ,pls press menu until check cutter is displayed.Then press enter to test your cutter.Also are you having any Mecha error?

Share this post


Link to post
Share on other sites

Somebody has hit the nail righ on the head ..

The cutter wheel must sit behind the metal bar it runs along to keep it firmly in place.

If you can see the cutter wheel, then just remove the three screws, on the bar, pop the cutter wheel behind the plate and re-screw.

If the cutter still isn't cutting properly, then the cutter wheel will need replacing. It's lost it's cutting edge.

That's all there is to it.

Share this post


Link to post
Share on other sites

Company I am working for fixing all Kodak machines in New Zealand. Cutter blade is normally nothing wrong on the 6800 or 6850.  Checking the belt for missing tooth and the gear connected to the motor for a crack. We sell the refurbished 6800 printer for only NZ$3000+gst (15%).  

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...