Jump to content
iamthecage

Ez Controller Software Download

Recommended Posts

Hello. I didn't say "Sim, tem isso. É a versão 6.6." . Even do not know what it means.

On Windows 10 can be used version 6.60, 6.71 and 6.80 ( the latest ) . I have these three versions. Can get any of them, but not free of charge.

On Windows 10 you also need new system software for your printer and scanner. Have them also.

Write private message ( in English ) if need something.

Share this post


Link to post
Share on other sites

Hello. EZ controller is universal software. There can be connected Noritsu minilabs, dry printers,  USB scanners, some Fuji, Epson and DNP equipment. Your choice where to use it.  Any EZ controller can use with printer, or without it.

On W10 can use EZ controller  version 6.60, 6.70, 6.72 and 6.80. I have all of them. All they can work with dongle, or without it.

EZ controller is just working interface. To connect something have install system software. This software has support W10 also. For example - to connect Noritsu scanners to W10 you need system software version 7.

On EZ controller can be installed many optional modules ( for example Digital Masking for scanner , Red eye correction software and many other ) . Have them also.

Write private message, if really need some software. Tell what you going install, what have yourself and what need from me.

Share this post


Link to post
Share on other sites

To replace QSS Kids need EZ controller, dongle ( or run without it ) , connection software and profile data vol 3. This way can be connected any minilabs from QSS3101-1 to QSS3502 ( QSS32, QSS33, QSS34, QSS35 ) . All can run from any Windows ( even on W10 x64 PRO ) . Write private message and tell what you need from me and what have yourself.

Share this post


Link to post
Share on other sites
On 4/12/2017 at 7:33 AM, johncord said:

Interested in such software for win7/win as I have the Xp version but its now out of use , would appreciate a reasonable working quote. Thanks

I have Noritsu keyboard but when plugged in keys are not working on windows 7pro 

but works on Co pro

any one had this problems?

Share this post


Link to post
Share on other sites

Sorry, but can't connect EZ controller directly. Directly can be connected QSS3101-1 and all latter.

To connect QSS28 and all latter have use EZ controller + EZ lab. Only this way can connect your QSS3011. QSS3011 will be connected to EZ LAB ( have enable this option on minilab ) . and EZ Lab can connect to EZ controller.Lok attached picture.

I have EZ Lab and EZ controller software. Both can work with dongles, or without them. Minilab is old, so I think it is too expensive to use two software. 

noritsu-37-network.jpg

 

Share this post


Link to post
Share on other sites
23 hours ago, Minilab service said:

Directly can be connected QSS3101-1 and all latter.

Sir Minilab Service, about QSS 3101 and QSS 3101-1, still not understand the difference between LP2200 and LP2600, since both have almost the same boards and Laser.

Share this post


Link to post
Share on other sites

QSS3101-1 has different printer. QSS3101 = SI-2600 + LP-2200 + PP-1223 and QSS-3101-1 = SI-2600 + LP-2600 + PP-1223. Directly can be connected only QSS3101-1 ( or QSS3111-1 ) with system software version G001 or later. To connect Net order printers EZ controller should be 5.0 , or latter.

Printer boards are the same on both models. Laser the same also. But laser control pcb is different on these minilabs ( on QSS3101 - J390710 and on QSS3101-1 - J390986 ) . All other boards inside laser control box are the same.  Also minilabs have different system software. Only Noritsu can tell, why one model is supported and other not. 

 

Share this post


Link to post
Share on other sites

You need EZ controller version 6.60 and above. The latest - 6.8. Have all these versions. Write private message, if need it.

EZ controller not enough. You also need updated system software for your equipment and it should support Windows 10.  I have system software for minilabs, dry printers and scanners.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...