mantacolor 0 Report post Posted January 22, 2016 I will buy a Fujifilm Frontier SYSTEM PROGRAM KIT 4_01_001 (LP71xx~LP79xx) to http://www.minilablaser.com/, but 1. the company is reliable? 2. anyone know if containing MS01, MS11, MS12, MS14, MS15, MS16, MS18, MS19, MS21 and software for kiosks Quote Share this post Link to post Share on other sites
Minilab service 238 Report post Posted January 23, 2016 Fujifilm Frontier system software kit is just software for Fuji 7xxx ( not printing interface ) . System software = Fuji printer=N1. This software designed by Noritsukoki ( not Fuji ) . That's the reason why no new versions. Noritsu printer ( the same software, but working on Noritsu application ) has version 16. Fujifilm Frontier system software kit is not enough - at least you need MS01. Would be good to have additional software too. For example - only to install MS16 you can work with 6 frames at the same time. Without it you have print frame by frame only. MS11 - SP500 or SP3000 connection software - without using FrontMan. Instead it can use FrontMan for film scanning. MS12 - printer driver ( to print any files from other computer - through MS01 server ) MS13 - hotfolder software. MS14 - template print software and MS15 DVD with templates. MS18 - skin tone correction software MS19 - ID photo print software MS21 - express variety print software Fuji 7xxx can be install using more friendly Noritsu software ( Ez-controller + QSS printer ) . This way Fuji become Noritsu. It is that all Fuji 7xxx are made by Noritsu and just painted green - white. All minilab hardware the same. E controller has many additional software too. Can write, if need it. If I where you I'd choose Noritsu software. Have Ez-controller and qss printer ( working without dongle ) . Also have additional software. Also have all MS01 set ( software and manuals, optional MS software ( with manuals too ) . On fotokiosk can install any software and using MS13 can transfer to printing server. Fuji has kiosk software "Order it" .I have order-it professional 9.6.7. ( with manuals ) , but need card to activate it. Hope you got enough information and can decide what to install. 1 mantacolor reacted to this Quote Share this post Link to post Share on other sites
mantacolor 0 Report post Posted January 23, 2016 I look for the new version. because my clients have complaints of their photos, they ask me because the color of your photo doesn't have the same color as their screens. They use Macs computers, use lightroom To correct the color and Photoshop editions there a way to print the photo directly from photoshop or lightroom without using the MS01? Quote Share this post Link to post Share on other sites
Minilab service 238 Report post Posted January 24, 2016 Which version ( MS01 and N1 ) you have now ? As I told before upgraded versions available for Noritsu branded minilabs only. When we are talking about Noritsu made these most important quality improvements : The gradation from white to black has become smooth ( since version 7 ) Highlight detail loss has been decreased ( since version 7 ) Highlight Balance Adjustment ( since version 12 ) A different color appeared in a gradation from white (unexposed area) to a color can be corrected automatically ( since version 12 ) All other changes - added new or changed functions, improved menu, added new Windows systems and some other changes. On Fuji can print from Photoshop ( or some other software ) using print driver ( MS12 ) . Anyway printed files will be transferred to printing server running MS01. MS12 is for Windows. Maybe try to share on Windows installed printer and use it on MAC ( as network printer ) . Anyway I didn't try do it myself. Noritsu print driver ( working through EZ controller ) can be installed on Windows or MAC. Fuji 7 can't run without MS01 + Fuji printer ( N1 = system software = Fuji printer ) or EZcontroller + Noritsu printer. Quote Share this post Link to post Share on other sites
mantacolor 0 Report post Posted January 27, 2016 i have this problem https://photos-4.dropbox.com/t/2/AABeKkLgIbFIfwlM8cUsiKj8II--7QSzr2ne51HP7iIQjQ/12/86965561/jpeg/32x32/3/1453935600/0/2/Sin%20t%C3%ADtulo-2%20copia.JPG/EKDz1UMY2xMgASgB/AUZ7H8_vUQDi5gshn5ReVtx3lcrrDqRGma01jefkTZw?size_mode=3&size=1600x1200 Quote Share this post Link to post Share on other sites
Minilab service 238 Report post Posted January 28, 2016 Can't open your file - see message Error (410) and sickbox image : https://www.dropbox.com/static/images/sickbox.png You'd better answer to my question and write what problems you have. Quote Share this post Link to post Share on other sites
mantacolor 0 Report post Posted January 29, 2016 Difficult to detail https://www.dropbox.com/s/7e9gdljthnq337p/Sin%20t%C3%ADtulo-2%20copia.JPG?dl=0 Quote Share this post Link to post Share on other sites
mantacolor 0 Report post Posted February 3, 2016 I have currently installed, MS01 v3.0 , there is a difference with the MS01 v 4.2 . I also want to update the N1 3.0 to N1 4.0 fuji printer, something happens if I do Fujifilm Frontier system software kit is just software for Fuji 7xxx ( not printing interface ) . System software = Fuji printer=N1. This software designed by Noritsukoki ( not Fuji ) . That's the reason why no new versions. Noritsu printer ( the same software, but working on Noritsu application ) has version 16. Fujifilm Frontier system software kit is not enough - at least you need MS01. Would be good to have additional software too. For example - only to install MS16 you can work with 6 frames at the same time. Without it you have print frame by frame only. MS11 - SP500 or SP3000 connection software - without using FrontMan. Instead it can use FrontMan for film scanning. MS12 - printer driver ( to print any files from other computer - through MS01 server ) MS13 - hotfolder software. MS14 - template print software and MS15 DVD with templates. MS18 - skin tone correction software MS19 - ID photo print software MS21 - express variety print software Fuji 7xxx can be install using more friendly Noritsu software ( Ez-controller + QSS printer ) . This way Fuji become Noritsu. It is that all Fuji 7xxx are made by Noritsu and just painted green - white. All minilab hardware the same. E controller has many additional software too. Can write, if need it. If I where you I'd choose Noritsu software. Have Ez-controller and qss printer ( working without dongle ) . Also have additional software. Also have all MS01 set ( software and manuals, optional MS software ( with manuals too ) . On fotokiosk can install any software and using MS13 can transfer to printing server. Fuji has kiosk software "Order it" .I have order-it professional 9.6.7. ( with manuals ) , but need card to activate it. Hope you got enough information and can decide what to install. Quote Share this post Link to post Share on other sites
mantacolor 0 Report post Posted February 3, 2016 The colors don't make the difference interface that are equal Quote Share this post Link to post Share on other sites
davidlam 23 Report post Posted February 4, 2016 Dear Minilabservice Sir, I have more than one Frontier 370 machines on the network and we want to send print orders FROM AN EXTERNAL PC WORKSTATION to them ( like print files to different printers in our office). We had bought MS01 ver. 3.1 Software for XP but we succeded in sending print order FROM AN EXTERNAL PC WORKSTATION to the first set of 370 ONLY recognized on the network. 1) Do I need to order other software(s) to achieve our purpose ? We want one operator to operate (sending print orders) to multiple 370 machines. 2) whatelse Fujifilm software(s) we need in additional to have our productivities maximized with one operator again ? 3) Lastly, i want to know how to change the names ( ID ) of multiple of Fronter 370 machinessss which were "harddisk cloned" from same source ? David Lam ( davidlam@sinopromise.com ) Quote Share this post Link to post Share on other sites
Minilab service 238 Report post Posted February 4, 2016 Hello davidlam. Can't understand you - bought software from reliable company and how install asking me. You should ask support them. When I sell something always explain how to install, guide buyer or sometimes help to install using Teamviewer. You didn't tell how your 370 minilabs installed - with FMPC or as tethered printer. MS01 is enough to connect few minilabs. All other software optional. I'd recommend add MS16 at least ( 6 frame view ) . What other software do can read on my post above. You have to make the lab’s network. Fuji recommends scanner names EZPC00, EZPC01, EZPC02, etc. All they should be on the same WORKGROUP ( have change from default MICSGROUP ) . IP should be individual for each minilab. You can use HD clone from one minilab on other, but have on cloned HD replace minilab backup folders from original HD ( printer and scanner - on D partition ) . To rename have disable Fuji software autorun ( start holding shift ) . Then can change computer name, working group and IP. Click left on My computer and there can change name and group. On network settings change IP and mask. Fuji recommended 192.168.1.x and 255.255.255.0 . Quote Share this post Link to post Share on other sites
yustas 73 Report post Posted February 7, 2016 Hm..The only thing I had as a question from David was a question about how to change the language of the software. Nothing else..And more:ALL what you have explained to him now about MS01 - has detailed described in the installation and instruction manuals (he also received it from us).So, if he decided to ask YOU about the features of MS01 - it is his right. Your explanations are always very detailed and I also read them and have a lot of useful.Thank you for them too. Quote Share this post Link to post Share on other sites
xander 0 Report post Posted February 24, 2016 how can I tell which software I have installed on windows 2000 NT? I am exporting to a PIC running a new operating system (windows 7 I think... does that matter?) and it writes the files with names and folders that don't seem to correspond to the order information at all...? How do I export to specific folders? Quote Share this post Link to post Share on other sites
Minilab service 238 Report post Posted February 24, 2016 Press "i" button on main window ( icon on left, at the bottom of the page ) and then can see what is installed on scanner running Windows 2000 or NT4. Quote Share this post Link to post Share on other sites
kisr86 0 Report post Posted April 14, 2016 Can someone can send me any of MS software,i dont have any of it? Pleasee mail: kisr86@gmail.com Quote Share this post Link to post Share on other sites
simon2019 0 Report post Posted April 17, 2016 Hello davidlam. Can't understand you - bought software from reliable company and how install asking me. You should ask support them. When I sell something always explain how to install, guide buyer or sometimes help to install using Teamviewer. You didn't tell how your 370 minilabs installed - with FMPC or as tethered printer. MS01 is enough to connect few minilabs. All other software optional. I'd recommend add MS16 at least ( 6 frame view ) . What other software do can read on my post above. You have to make the lab’s network. Fuji recommends scanner names EZPC00, EZPC01, EZPC02, etc. All they should be on the same WORKGROUP ( have change from default MICSGROUP ) . IP should be individual for each minilab. You can use HD clone from one minilab on other, but have on cloned HD replace minilab backup folders from original HD ( printer and scanner - on D partition ) . To rename have disable Fuji software autorun ( start holding shift ) . Then can change computer name, working group and IP. Click left on My computer and there can change name and group. On network settings change IP and mask. Fuji recommended 192.168.1.x and 255.255.255.0 . I have SP500+FMPC(LP1500) and need help to connect, also I have MS01 v2.5, MS11 and DellPC. Please give options just for instructions as well as software update. Quote Share this post Link to post Share on other sites
kisr86 0 Report post Posted April 22, 2016 Does anyone now how to make higher resolution then 1024x768 on my MS01 v4.2? When i select recomended resolution on my laptop 1366x768 i can't see all elements on screen (second row on "load and edit" screen i see half)? Does Ms01 4.2 incompatible with higher resolution or i have some problem? Thanks. Quote Share this post Link to post Share on other sites
Dejka Sabac 0 Report post Posted April 9, 2019 On 4/22/2016 at 10:46 PM, kisr86 said: Does anyone now how to make higher resolution then 1024x768 on my MS01 v4.2? When i select recomended resolution on my laptop 1366x768 i can't see all elements on screen (second row on "load and edit" screen i see half)? Does Ms01 4.2 incompatible with higher resolution or i have some problem? Thanks. i have same problem too Quote Share this post Link to post Share on other sites
Dejka Sabac 0 Report post Posted April 9, 2019 (edited) and I need user manual for fuji ms01 v4.2 please and sqmo softvare to help me Edited April 9, 2019 by Dejka Sabac Quote Share this post Link to post Share on other sites
Walter 0 Report post Posted April 9, 2019 Quote Hello, im not sure if i need additional software, however i dont have any instruction, operator manuals on ms01 4.2 can anyone help with some operators manual for how to use the software. thank you so much Quote Share this post Link to post Share on other sites
Walter 0 Report post Posted April 9, 2019 Hello, im not sure if i need additional software, however i dont have any instruction, operator manuals on ms01 4.2 can anyone help with some operators manual for how to use the software. thank you so much Quote Share this post Link to post Share on other sites
Minilab service 238 Report post Posted April 9, 2019 All manuals should be with software. Ask software supplier to provide it. When I sell some software I provide all manuals, answer all questions and if need help to install. Many from this forum can confirm it. 1 Forestyl reacted to this Quote Share this post Link to post Share on other sites
Walter 0 Report post Posted April 9, 2019 Could we discuss sotware and manuals, and possibly some giidense? Quote Share this post Link to post Share on other sites
Walter 0 Report post Posted April 9, 2019 hello, anyone have the install and user guide for ms01 4.2....PLEASE immagetek@gmail.com Quote Share this post Link to post Share on other sites
TECNOR 15 Report post Posted April 9, 2019 I have MS01 4.2 and manual but its not free Quote Share this post Link to post Share on other sites