Jump to content
nares911

Need Capacity Booster "F" Z026532-01 For Noritsu QSS3702HD

Recommended Posts

All capacity boosters for qss37 series have been discontinued.
They were very expensive - more than 16 000 US$/pc.
The Kit consisted of 1 small PCB only.

Please see the list of all Capacity Boosters for qss37 series below:
QSS 3701 - without a capacity booster
QSS 3702 = 3701+Capacity booster F Z026532-01
QSS 3702 PRO (without a scanner) has a Capacity booster J (Z027216-01)
QSS 3702 PRO with a scanner has Capacity boosters F (Z026532-01) and J(Z027216-01)
QSS  3703 = 3701+Capacity boosters F(Z026532-01) + G (Z026536-01)
QSS  3703 PRO without a scanner has a Capacity boosters J(Z027216-01) and G (Z026536-01)
QSS 3703 PRO with a scanner has a Capacity boosters F(Z026532-01), J(Z027216-01)and G (Z026536-01)
QSS 3704 = 3701+Capacity boosters F(Z026532-01) + G (Z026536-01) + Capacity booster H Z026540-01
QSS 3705 = 3701+Capacity boosters F(Z026532-01) + G (Z026536-01) + Capacity booster H Z026540-01+ Capacity booster I Z026544-01

Share this post


Link to post
Share on other sites

Not all information above is correct. Information from service manual, but difficult to understand when didn't work with these minilabs.

First tell what you need and what you have. Do you have capacity booster board ( inside your QSS3702HD printer ) ? If yes - which type.

Maybe you asking capacity booster CD? Not all capacity boosters need to install additional CD.

Do you have Capacity Booster  H software ( CD ) , hardware ( board ) , or both of them? It is possible to use boosters on different minilab - just have to know how to do it.

Share this post


Link to post
Share on other sites

Hm..
What exactly is NOT CORRECT in the information given above by me? 
And "not correct" information or "difficult to understand"?
If you will fail to explain what was wrong in my information - it looks like an attempt to leave "the last word" in any thread.

 

Share this post


Link to post
Share on other sites

Wrong information about QSS3703 and nonsense about QSS3704, QSS3705. All experienced service engineers can confirm that I right. As I told before it is difficult understand about boosters, if to read manual and do not see minilab. I just want provide correct information and do not want to say last words. If Nares answer my questions I can tell what he can do.

Share this post


Link to post
Share on other sites

Dear Minilab Service & Yustat .
Thank you ,

My situation is
I have machine QSS3701HD that working properly one unit and one pieces of Capacity booster H Z026540-01 ( for QSS3704HD )
But my customer need QSS3702HD .


I can not convert it to QSS3704HD because QSS3704HD used Longer Paper Processor ( CD have 2 tank ).
I also have all CD program of Capacity booster F and H .


As Minilab Service word , it true that one machine (QSS37xxHD) model used only one capacity booster .
From attach picture is Capacity Booster H from QSS3704HD.
It have only Booster H.

I will prefer if some one need to exchange his Capacity Booster F with  my Capacity Booster H ( most expensive one ).
contact my mail    nares911@yahoo.com
Phone +6681-3149655

Thank you

 

booster H-1.jpg

Share this post


Link to post
Share on other sites

I have 3704 and 3705 and both have just one Capacity booster board inside. 3704 use Capacity  booster H and 3705 use Capacity booster I. each minilab use a different capacity booster software and I can not exchange capacity boosters to convert any of both minilabs, because they have a different procesor.

Share this post


Link to post
Share on other sites

I know that each lab of qss37 series has only one Capacity Booster PCB. No need to write it to me in every message.
The only meaning of my listing of all possible Capacity Boosters was to show the process of the upgrade,
Each Capacity Booster PCB for QSS37 contains ALL previous boosters' features - that was a meaning of my post.
I have never written that qss3704 has 3 PCB at once installed. 
Thre is no need to make the upgrade of QSS37 like on QSS32 series adding one by one booster to increase the printing volume.

Share this post


Link to post
Share on other sites

It is possible upgrade QSS37 minilab adding, or changing capacity booster, but all depends on exact minilab specification. QSS37 has only two printers - HD and not HD. Different only processor. Some QSS304 has 1 CD tank and some 2 CD tanks ( depends on processor specification ) .

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...