Jump to content
Sign in to follow this  
bokker09

noritsu 2611 daily setup

Recommended Posts

Hello everyone.When I do the daily setup.The  first correction is "y"-4.3.So I did it again and again.The correction is also "y"-4.5 which is a large number.The color of the test print is also not right. How can I do for it?

Share this post


Link to post
Share on other sites

Probably the CD is bad, when it's not developing properly the prints will go bluish, this is especially noticeable in the blacks.

If you are sure the chemistry is good, the issue will be with the densitometer, it will probably need to be taken apart and cleaned optically.

Edited by Dave S

Share this post


Link to post
Share on other sites
1 minute ago, Dave S said:

The most likely cause will be the densitometer is not reading properly.

Take the densitometer unit out of the machine and disassemble it and clean all the optical parts.

But the display shows the right correct value about the color

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...