Jump to content

Recommended Posts

On Fuji 370 minilab  ( LP2000 printer  ) error E-2502 can cause :
Missing power supply on fan 
(F620/F621/F622) .
Anti-dust fan (F620/F621/F622) malfunction. Fan has power supply, but doesn't rotate.
Rotating sensor malfunction. Fan rotates, but no level changes from fan rotation sensor.
Connection error or disconnection between anti-dust fan(F620/F621/F622) and PDC13 on PDC20 circuit board
Circuit protector F4 on PDC20 circuit board trip
PDC20 circuit board malfunction
CTL20 circuit board malfunction

Share this post


Link to post
Share on other sites

If all three anti dust fans rotate, but have error then check fan rotation sensors. Look levels on F620, F621 and F622 connectors ( pin 3 ) . There should see changes, when fan stopped and when fan rotate. Hold fan ( do not allow to rotate ) and then release. You should see changes on pin 3. 

If rotation sensors work, but still have error then check connectors. Rotation sensors are connected to PDC13 pin 1, 4 and 7 ( there signals from F622, F621 and F620 ) . 

If all OK, but still have errors then faulty PDC20, CTL20, or some connector on them.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...