Jump to content
Sign in to follow this  
DonCorleone

QSS-3704 / 3704f QSS Mode & NetOrder

Recommended Posts

QSS3704F is NPS printer - not Netorder printer. Netorder printers are QSS3502 ( not PLUS ) and older. On NPS printer you can print using print driver, but it should have this option ( version 5.15 and latter ) . Hotfolder folder can be used with these printers. 
Do not think, that you get better quality, than it is on EZ controller. EZ controller has many possibilities to reach the best possible print quality.  QSS3704F is not HD printer. Might be here is Fuji LP-7700. On printer need to use the latest printer software. If version is older than 12 then have not white balance adjustment and have slightly yellow on light area. The latest printer system software - version 19 and the latest EZ controller - version 7.0.
Need good adjust middle tone, colors in light area, use good paper, select correct paper profile. If it is not enough can load customized profiles for printer and monitor.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...