korea lp7500 0 Report post Posted December 15, 2020 I need to change the ip address, how do I enter admin mode in the display module? (lp7500) Quote Share this post Link to post Share on other sites
Minilab service 238 Report post Posted December 15, 2020 (edited) Display module is not necessary to change IP. If you have communication with server you can change minilab IP there ( minilab maintenance menu, service mode 2260 ) . On LP7500 can be installed new and modern Noritsu software ( system software version 19 and EZ controller version 7 ) . Last Fuji system software is very old ( version 4 ) . Noritsu system software has many advantages, if compare with Fuji. For example on Noritsu can adjust white balance and Fuji can print without it ( instead white - slightly yellow, or red ) . Write private message, if want to upgrade. Can help convert Fuji to Noritsu. If have not communication with server you can change IP on display module. Here how to do it. Edited December 15, 2020 by Minilab service Quote Share this post Link to post Share on other sites
korea lp7500 0 Report post Posted January 6 Thanks i solved this Quote Share this post Link to post Share on other sites
