Fuji1 0 Report post Posted December 28, 2020 Hello on this group I have this problem since this morning'' Sod detection failed E-2529I connected the laser cables well cleaned all the mirrors but nothing has changed please help me Quote Share this post Link to post Share on other sites
Fuji1 0 Report post Posted December 28, 2020 Sos detection failed E-2529 Quote Share this post Link to post Share on other sites
yustas 73 Report post Posted December 29, 2020 All steps to find a solution can be found here:https://minilablaser.com/troubleshooting/fujifilm/ Welcome! Quote Share this post Link to post Share on other sites
sisir 20 Report post Posted December 30, 2020 You should mention Machine model number Quote Share this post Link to post Share on other sites
Fuji1 0 Report post Posted December 31, 2020 Fuji Frontier 375 Quote Share this post Link to post Share on other sites
Teki 0 Report post Posted February 6 I am having same problem laser unit error 2529 don't know what to do please help me please Quote Share this post Link to post Share on other sites
Minilab service 249 Report post Posted February 6 All depends on minilab model. E-2529 means synchronization sensor does't see laser beam. On some models for synchronization used Green channel, but on other model;s - Red. Can be faulty AOM driver, or laser head. Need to check them. To say how to do need to know minilab model. Quote Share this post Link to post Share on other sites
Teki 0 Report post Posted February 6 It's frontier 355 sir Quote Share this post Link to post Share on other sites
yustas 73 Report post Posted February 6 Read the remedy of this error here:https://minilablaser.com/ Quote Share this post Link to post Share on other sites
Dave S 83 Report post Posted February 6 (edited) 44 minutes ago, yustas said: Read the remedy of this error here:https://minilablaser.com/ Come on man, using this forum to direct people to your own website is not a very ethical thing to do. How would you feel if I came onto your forum and directed people here? Edited February 6 by Dave S Quote Share this post Link to post Share on other sites
Teki 0 Report post Posted February 6 Hi once more my great After solving the error 2529 i tried à test print only blue and magenta came out no yellow I don't know what happen again thanks Quote Share this post Link to post Share on other sites
Dave S 83 Report post Posted February 6 No yellow on the print means there is no blue exposure, it’s either a bad blue AOM or a bad blue laser head. Quote Share this post Link to post Share on other sites
Teki 0 Report post Posted February 6 Ok sir dav thanks so much how can i do to remedy it sir please? Quote Share this post Link to post Share on other sites
Dave S 83 Report post Posted February 6 Try to swap the B and G channels on the AOM driver. If after doing that you get prints that are missing magenta the B AOM driver channel is faulty. Quote Share this post Link to post Share on other sites
yustas 73 Report post Posted February 6 1 hour ago, Dave S said: Come on man, using this forum to direct people to your own website is not a very ethical thing to do. How would you feel if I came onto your forum and directed people here? Hey, Jason, If you feel good writing and writing and writing the same explanations to the persons who do not want to use "Search" feature of THIS forum - I just give a one-click access to the place where I have described these errors with remedies. All they need is to click on the link. It is free. You can do everything you want on my forum also. I do not care. Quote Share this post Link to post Share on other sites
Dave S 83 Report post Posted February 6 (edited) 50 minutes ago, yustas said: Hey, Jason, If you feel good writing and writing and writing the same explanations to the persons who do not want to use "Search" feature of THIS forum - I just give a one-click access to the place where I have described these errors with remedies. All they need is to click on the link. It is free. You can do everything you want on my forum also. I do not care. Who's Jason! Except it wasn't a direct link to a page describing the problem and remedies was it. Eugene you've already been told once to stop posting on here before because of your actions, yet here you are still doing the same thing. This is not the place to advertise or sell. I think what you are doing is disrespectful to the owner of this forum. Edited February 6 by Dave S Quote Share this post Link to post Share on other sites
