pmartip Posted March 28, 2011 Report Share Posted March 28, 2011 hELLO: Somebody kwows how to configure two g3 kiosk to share the printer, in configuration appears the option to make a kisks networks but i can't configure one as host. Any Suggestion . Regards Quote Link to comment Share on other sites More sharing options...
frenchman Posted March 28, 2011 Report Share Posted March 28, 2011 for connect two kiosk and one kodak printer (host and satelite) Two ip adress and two differente name in the network area ,this configuration need the netbios (name of the computer ) networking ! Workgroup named "PICTURE" Frenchman Quote Link to comment Share on other sites More sharing options...
pmartip Posted March 29, 2011 Author Report Share Posted March 29, 2011 Thanks a lot, but you can put an example of config. Regards Quote Link to comment Share on other sites More sharing options...
frenchman Posted March 30, 2011 Report Share Posted March 30, 2011 ip adress 192.168.0.1 for the first kpk ,named KPK1,in the workgroup PICTURE by defaut ip adress 192.168.0.2 for the second kpk ,named KPK 2 , in the workgroup picture the first kiosk with the printer 68XX is the HOTE/server ,the second is the satelite .With the first search the second in your network area IMPORTANT => The programs must be identical KPK V2.X regards Frenchman Quote Link to comment Share on other sites More sharing options...
pmartip Posted March 31, 2011 Author Report Share Posted March 31, 2011 It´s clear for me , but i have two G3 kiosk with 2.0 and the host option apears disable on both, and is impossible check the option , perhaps i need to enable something more in any part. Do you know if we forgot somethinG step ? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.