jayg Posted July 24, 2010 Report Share Posted July 24, 2010 Hi, Can anyone help ? When using my G3 kiosk on about 20% of the photos there is a line / flash on them as per the image below, I have updated the firmware so am wondering if the printer is coming to the end of it's life. Any ideas appreciated. Quote Link to comment Share on other sites More sharing options...
Trevor brown Posted July 24, 2010 Report Share Posted July 24, 2010 Have you cleaned the Head and rollers Quote Link to comment Share on other sites More sharing options...
jayg Posted July 24, 2010 Author Report Share Posted July 24, 2010 Hi, No I've only recently acquired this machine, any tips ? James Quote Link to comment Share on other sites More sharing options...
Trevor brown Posted July 24, 2010 Report Share Posted July 24, 2010 Use Isoproply alcohol on the print head with a lint cloth, also clean the Rubber rollers behind and infront of the head.. these are on the main section of the printer you will need to remove the small plate covers to release them. Small black plug like object one on each cover, pull it and the cover and rollers come out. The head is visible as you lift the lid up ( on bottom of lid section.) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.