Jump to content

Mainboard Kodak G3


Anthy
 Share

Recommended Posts

Hello everyone,

I'd like to do a little upgrade on my Kodak G3. But I have no technical information about the mainboard. At the moment there are 2 of the 4 memoryslots used with each 256MB PC 2700.

Can I place 2 more modules using the unused slots, or must I replace them?

What I also like to know, what is the fastest CPU I can use and is there a possibility to do a BIOS update?

Thanks in advance,

Anthy

Link to comment
Share on other sites

if  sinstars specs are correct u can use

Intel® Pentium® D, Intel® Pentium® 4, Celeron®, or Celeron® D processor

http://compare.intel.com/pcc/showchart.aspx?mmID=138&familyID=10&culture=en-US

which means u should pentium D (dual core) CPU (Note Pentium D = pentium D, does not mean any other dual core intel cpu)

u can bump up the ram too...

my g3's only have two ram slots, and only support early intel cpu's(400fsb) and are painstakingly slow. im jealous hahaha!

btw: to find more info on ur mainboard, look on it and find some identification, like a serial number, or model number that would greatly help identify it properly as well.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...