PMG3 AND APEX NETWORK

[PHOTOKING]

DEAR ALL,

I HAVE A APEX WORKSTATION AND KODAK KIOSK PMG3,

KODAK APEX  SOFTWARE V.3.0 AND PMG3 KIOSK V. 2.0 I CAN TRY TO NETWORKING KIOSK WITH APEX.

BUT STSTUS IS APEX NOT FOUND ! PLEASE  HELP ME YOUR EXPERT ADVICE

THANKS IN ADVANCE

PHOTOKING

[frenchman]

GO here"  http://www.kodak.com/eknec/PageQuerier.jhtml?pq-path=14969&pq-locale=en_US&_requestid=1812 " and select and donwload this patch "KODAK Picture Kiosk, Software Version 2.0 Service Pack 1.1 (SP1.1)"

good luck frenchman

[PHOTOKING]

Hello  frenchman !

Thanks For Replay Me

I have a allredy V.2.0 software in kiosk Orderststion and   V3.0 in Apex Workstation.

But Networking Problem Apex Not Found In Kiosk !!

please Help !

Thanks

[frenchman]

Have you read in the link the "find out more" for the patch

look=>

About the KODAK Picture Kiosk, Version 2.0 Service Pack 1.1 (SP1.1) Software

This release improves the reliability and robustness of the Kiosk.

This is a companion release with the KODAK Adaptive Picture Exchange V2.5 SP1.1 Software. If you have an APEX, make sure that you install the Adaptive Picture Exchange V2.5 SP1.1 Software on the APEX before you install the KODAK Picture Kiosk V2.0 SP1.1 Software on the Kiosk

this a patch for the network connection

bye frenchman.

[Trevor brown]

iF YOU ARE RUNNING VERSION 3.0 SOFTWARE, YOU SHOULD HAVE A COPY OF V2.1 FOR THE KIOSKS I WAS TOLD V2 WILL NOT WORK WITH APEX V3.0