Nela Posted January 3, 2009 Report Share Posted January 3, 2009 Hi Everyone, I have a Kodak G3 and I was wondering if anyone can give me some info on making it able to accept photos with Usb flash drive. Any help will be greatly appreciated. Thank you. Quote Link to comment Share on other sites More sharing options...
andy Posted January 3, 2009 Report Share Posted January 3, 2009 Do you have the G3 with a usb port next to the card readers or the older G3 without a front usb port. Quote Link to comment Share on other sites More sharing options...
New Life Posted January 3, 2009 Report Share Posted January 3, 2009 What version of Software do you have? If you are running on Version 5.2 you have to install the Enabler called front USB Device V1.0. I hope it will help Quote Link to comment Share on other sites More sharing options...
Nela Posted January 4, 2009 Author Report Share Posted January 4, 2009 I don't have the front usb port installed. How do I purchase the Usb enabler software and intall the usb also? I am not to familiar with the technical aspects of computer system. Quote Link to comment Share on other sites More sharing options...
New Life Posted January 4, 2009 Report Share Posted January 4, 2009 You don´t need the Front Usb port because on a G3 what we technical guys do is getting from a computer shop an USB extension cable( one side male on the other side Female) and connect to an USB port at the back of the G3.( Male side goes to connect on G3 and the female side is were the customer USB Flash drive is connected) What Version of Software is installed in G3? Quote Link to comment Share on other sites More sharing options...
Nela Posted January 4, 2009 Author Report Share Posted January 4, 2009 I have Version 5.0. If I purchase the USB extension cable, where can I get the Enabler to work with the Software I have? Quote Link to comment Share on other sites More sharing options...
davidlam Posted January 13, 2009 Report Share Posted January 13, 2009 1) you need to enable the Blue tooth; 2) you need to open computer to see if there is a Blue tooth detecting device (figure size), it must be "3com" branded and Model "3CREB96B" built in with G3, unless you installed an external one. 3) Most of the time the device needed to be reseated to recover its functionality. Good luck ! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.