ABDUL QUDDUS Posted May 18, 2012 Report Share Posted May 18, 2012 Hi, Now aday we are working on FMPC III first time on FR350. During installation on FMPC, IC III and SP-2000 we didn't face any problem and all the installation was according to the manual but after installation i am facing some problem on SP-2000. When i scan any negative from frontman screen eighter for printing or scanning it looks hang on FMPC and showing status BUSY if i try to delete this order not possible and showing an error. My question is eighter i miss any step during installation or any other problem. For help i am atteching a screen shot as attechment. Any help would be appriciated Best Regards ABDUL QUDDUS Quote Link to comment Share on other sites More sharing options...
ABDUL QUDDUS Posted May 18, 2012 Author Report Share Posted May 18, 2012 Hi, here is the attechment. fms 1 Quote Link to comment Share on other sites More sharing options...
ghn5ue Posted May 19, 2012 Report Share Posted May 19, 2012 Orders will show 'busy' until they are sorted on the SP2000. The status will then change on the MS01 system. If the film advance mode is set to auto or semi on the frontman screen orders will sort automatically, if it is set to manual you must press sort while in the printing screen. Quote Link to comment Share on other sites More sharing options...
ABDUL QUDDUS Posted May 19, 2012 Author Report Share Posted May 19, 2012 Hi Yes i tried it also but no difrence it shows 'busy'. one more information which is quite strange for me for example if i will send 4R size in sort it shows 102C. what is user name and password for frontman screen mentinence which is situated on right hand bottom side on frontman screen. Thanks for intrest Best Regards ABDUL QUDDUS Quote Link to comment Share on other sites More sharing options...
ghn5ue Posted May 20, 2012 Report Share Posted May 20, 2012 I think you need to log in as 'support mode' to gain access. Click the tools button on the top right, and select log off, as the systme restarts log in with this password '5u990rtm0d3' and you will be in support mode with full access. Quote Link to comment Share on other sites More sharing options...
ABDUL QUDDUS Posted September 18, 2012 Author Report Share Posted September 18, 2012 Hi Any suggession. Regards Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.