petitsam Posted July 27, 2012 Report Share Posted July 27, 2012 Hi to all I hope i'll find answers to some questions about FR370 installation 1- is it possible to make a new installation without having floppy disk data backup ? 2- what config if must change the hole computer of the workstation ? Quote Link to comment Share on other sites More sharing options...
petitsam Posted July 31, 2012 Author Report Share Posted July 31, 2012 No one knows :-/ Quote Link to comment Share on other sites More sharing options...
ABDUL QUDDUS Posted August 1, 2012 Report Share Posted August 1, 2012 Hi New installation means installation without floppy but instead of floppy you must have jig. Regards ABDUL QUDDUS Quote Link to comment Share on other sites More sharing options...
lik Posted August 1, 2012 Report Share Posted August 1, 2012 c est possible les disquettes c est juste pour remettre tes propres donnees a defaut tu les met manuellement c est tout. si toute fois j ai compris ta question Quote Link to comment Share on other sites More sharing options...
petitsam Posted August 1, 2012 Author Report Share Posted August 1, 2012 Merci pour ta réponse Quote Link to comment Share on other sites More sharing options...
paudiek Posted September 17, 2012 Report Share Posted September 17, 2012 If you can still get into the menu of the scanner and the scanner connects to the printer, you can make the back ups yourself from the menu.If you install the software without floppies, you will need to register the lens, do the focus adjustments rep rates etc,etc... On the 390 (I don't know if its the same for the 370) I have to dump a file called "Fujifilm" in the D drive otherwise it will not give me the option to do a new installation. If you do not have the floppies and can't make them, use the upgrade option, even if its the same version, it should allow you to make the floppies from there. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.