tech2 Posted June 20, 2012 Report Share Posted June 20, 2012 Hi all, On startup of my F570, I get E2842 on the machine display and CTL23 under it with a error sound, doesn't come up on the FMPC though. Anyone know what this is? The error is not in the F570 service manual. I replaced the CTL23 BUT SAME ERROR. No known effects at this stage....machine warms up, no other errors. Regards Tech2 Quote Link to comment Share on other sites More sharing options...
asagi77 Posted July 11, 2012 Report Share Posted July 11, 2012 Hi, This problem came with sensors please cross check sensors or check Poorly connected or broken harness between the PDA8 on the PDA23 circuit board and JNF1 on the JNF23 circuit board Quote Link to comment Share on other sites More sharing options...
sisir Posted August 5, 2012 Report Share Posted August 5, 2012 Does your machine working well? If after pressing Ok the machine runs ok, please check the connections of the Front Panel. Quote Link to comment Share on other sites More sharing options...
NDI Posted September 9, 2012 Report Share Posted September 9, 2012 Check th econnector to the front panel lcd it might be broken or poorly connected Quote Link to comment Share on other sites More sharing options...
FOTO STEREO Posted August 18, 2019 Report Share Posted August 18, 2019 GOOD AFTERNOON, I HAVE THE SAME PROBLEM, I FOLLOWED THE INSTRUCTIONS REGARDING THE CONNECTION OF THE PCB, ALSO CHANGE THE DISPLAY BUT THE ERRORS IN FRONTIER 570 ALSO APPEAR TO ME Quote Link to comment Share on other sites More sharing options...
Minilab service Posted August 18, 2019 Report Share Posted August 18, 2019 This error can be, if installed new software. E-2842 means PDA circuit board connector is disconnected. Disconnected connector on PDA23 circuit board is detected. Can be poorly connected or broken harness between the PDA8 on the PDA23 circuit board and JNF1 on the JNF23 circuit board. Quote Link to comment Share on other sites More sharing options...
FOTO STEREO Posted August 20, 2019 Report Share Posted August 20, 2019 On 8/18/2019 at 2:52 PM, Minilab service said: Este error puede ser, si se instala un nuevo software. E-2842 significa que el conector de la placa de circuito PDA está desconectado. Se detecta el conector desconectado en la placa de circuito PDA23. Puede estar mal conectado o el arnés roto entre el PDA8 en la placa de circuito PDA23 y JNF1 en la placa de circuito JNF23. Limpié los conectores y los volví a conectar desde el PDA y JNf1 pero el problema continúa, ¿alguna otra indicación? gracias Quote Link to comment Share on other sites More sharing options...
Minilab service Posted August 20, 2019 Report Share Posted August 20, 2019 I never said, what you wrote ( Este error puede ser....) . Even do not know, which language here. Do not understand your language. This is international forum, so write in English. You should respect other forum members, if want to get answers to your questions. Quote Link to comment Share on other sites More sharing options...
alejandra Posted August 21, 2019 Report Share Posted August 21, 2019 hello, I need help please, I have a 340 minilab frontier and I have a problem with the communication of the computer with the pic program, this message appears (Could not communicate with job database server PIC) Quote Link to comment Share on other sites More sharing options...
FOTO STEREO Posted August 21, 2019 Report Share Posted August 21, 2019 5 hours ago, Minilab service said: I never said, what you wrote ( Este error puede ser....) . Even do not know, which language here. Do not understand your language. This is international forum, so write in English. You should respect other forum members, if want to get answers to your questions. I AM SORRY, THE CHROME TRANSLATOR SENT IT IN THAT LANGUAGE. I cleaned the connectors and reconnected them from the PDA and JNF1 but the problem continues, any other indication? Thank you Quote Link to comment Share on other sites More sharing options...
Minilab service Posted August 21, 2019 Report Share Posted August 21, 2019 Check power suppliers on PDA23 ( D+5V2, P+5V, +24V01, +24V41, +24V42, +24V43, +24V51, +24V52, +24V53, +24V61, +24V62, +24V63 ) . Try test somewhere PDA23 and JNF23 boards. JNF23 is back print board. Try to disable back print. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.