2astalavista Posted August 10, 2012 Report Share Posted August 10, 2012 Hi all! I'd like to know where can I set not to zoom/resize abut +1% photos before printing in Fuji Frontier 340 Minilab sowftware? The border (1-2 mm) of the images allays get cutted even if FIT setting is ON. :-/ Thank you for help!!! Alex Quote Link to comment Share on other sites More sharing options...
ghn5ue Posted August 10, 2012 Report Share Posted August 10, 2012 Can not be adjusted. Images printed 'Fit In' or 'Fill In' have 18 pixels added as a bleed to prevent white edges on boarderless prints. If your files are sized properly at 300 dpi you can print 'No Resize' which will not add the 18 pixel bleed. Quote Link to comment Share on other sites More sharing options...
Greg Posted August 13, 2012 Report Share Posted August 13, 2012 Try to readjust paper as described in installation manual. Start first with narrowest paper and only check widest if they are OK go to drink coffee and make smile. If not make next mag. and so on until done Regards, Greg Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.