mfvster Posted July 26, 2012 Report Share Posted July 26, 2012 machine 350 after doing paper set ups can prints but after few times printing coming magenta color prints. i check laser with replacing another machine replace 2 AOM units but the problem same i checked with chemicals that is okay can some body to tell me any idea could be the reason for coming like this thanks Quote Link to comment Share on other sites More sharing options...
aerosport Posted July 27, 2012 Report Share Posted July 27, 2012 Did you check the micro filter? Changing color in times mostly caused by heat on AOM's. What is the temperature inside your shop? If filter is ok then, laser, AOM, LDD. When you replace the AOM make sure you replace it with the corrct one, which means 3 AOM's two is the same. If you accidentally mix them then your case will happen, not immediately but changing color few times per day. Quote Link to comment Share on other sites More sharing options...
mfvster Posted July 27, 2012 Author Report Share Posted July 27, 2012 thanks for replying me i checked the filter and replayed 2 AOM are green and blue but the problem same when i check laser by replacing another machine prints coming without any trouble i'm confuse this any way thanks for replaying me Quote Link to comment Share on other sites More sharing options...
sameer bahho Posted November 5, 2012 Report Share Posted November 5, 2012 hi my frend i have frontier 550 i have the same probleme prints changed to magenta that meen no yelw color i replace the aom noting hapend stell tha same problem tel now i have tha problem i think it is LDD board please if you solve the problem inform us Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.