Lyusi Posted June 3, 2012 Report Share Posted June 3, 2012 Hello! The problem is that upkeep print and paper condition setup not pass at all from instalation (in January) until now. Minilab is Frontier 350, LP1500SC Ver7.7-0X-010, without scanner, DICII, FMPCII, Auto Densitometer AD100. The chemistry is ok - the white is white, the black is black (4 cartridges Fujifilm CP48S from january until now). Type of paper in Paper magazine registration is C, I use Fuji crystal Arhive paper. Temperatures of baths are OK. The quality of pictures is OK, but tests not pass at all... Any ideas? Quote Link to comment Share on other sites More sharing options...
photothaibaoui Posted June 4, 2012 Report Share Posted June 4, 2012 TRY TO REINNISSIALISETE THE DENSITOMETRE Quote Link to comment Share on other sites More sharing options...
Lyusi Posted June 4, 2012 Author Report Share Posted June 4, 2012 What is procedure for reinitialisation of the densitometer? Quote Link to comment Share on other sites More sharing options...
yegen Posted June 7, 2012 Report Share Posted June 7, 2012 fuji 350 E-2416 fails to help Quote Link to comment Share on other sites More sharing options...
Lyusi Posted June 8, 2012 Author Report Share Posted June 8, 2012 I didnt see connection between unpass upkeep prints and E-2416... Any other ideas? Quote Link to comment Share on other sites More sharing options...
Lyusi Posted June 26, 2012 Author Report Share Posted June 26, 2012 Anybody to know how to fix this problem ? Quote Link to comment Share on other sites More sharing options...
TECH2U Posted July 16, 2012 Report Share Posted July 16, 2012 Try change densitometer lamp Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.