pepe21 Posted April 17, 2012 Report Share Posted April 17, 2012 I have an LPC connected to a 390..everything is working great except when I do my close down checks the 390 printer shuts down then my LPC but the printer restarts again, has any one have encountered this? Quote Link to comment Share on other sites More sharing options...
slawo Posted April 23, 2012 Report Share Posted April 23, 2012 Hi Pepe Can you send me LPC program for Frontier 390? I have for share FMPC, FMPC II . My email: slawo2552@o2.pl RGS Quote Link to comment Share on other sites More sharing options...
Balgarr Posted April 24, 2012 Report Share Posted April 24, 2012 Hi, i know there's a pcb that synchronise the shutdown between the LP and the LPC, i think it's called the timer board, check this (sorry it's very few but i'll try to be more explicite soon when i'll check the Service manual) Quote Link to comment Share on other sites More sharing options...
barsheed Posted April 26, 2012 Report Share Posted April 26, 2012 Hi You need to check the pin no 1 is off in firewire card in fmpc or use ratoc original. Card Quote Link to comment Share on other sites More sharing options...
pepe21 Posted April 26, 2012 Author Report Share Posted April 26, 2012 Thank you barsheed,what do you mean pin no 1? Quote Link to comment Share on other sites More sharing options...
servmanmex Posted May 6, 2012 Report Share Posted May 6, 2012 Hola Pepe21, ya solucionaste tu problema? a mi me pasa lo mismo pero con una frontier 350. Si ya esta resuelto, me gustaria que lo publicaras. Gracias Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.