petitsam Posted January 6, 2012 Report Share Posted January 6, 2012 Hi! the main control unit on frontier 330 is damaged so anyone can help and explain the steps to follow for a new installation thanks for the help Quote Link to comment Share on other sites More sharing options...
Aaron_RIMG_TSR Posted January 6, 2012 Report Share Posted January 6, 2012 The steps are in the 330 Service manual. Follow section "4.3 Reinstallation" if you have the backup floppy disks. Follow section "4.4 New Installation" if you do not have the backup floppy. Quote Link to comment Share on other sites More sharing options...
petitsam Posted January 6, 2012 Author Report Share Posted January 6, 2012 Hi! tried the new installation i got the following message "error 520 incorrect pc drive configuration" what's wrong ? Thanks for the reply Quote Link to comment Share on other sites More sharing options...
Aaron_RIMG_TSR Posted January 6, 2012 Report Share Posted January 6, 2012 Make sure that the computer has 2 hard drives available. a C drive and D drive. Also, both of those drives need to be 10gb. If you are partitioning drives and have more than the total 20gb, set it up like this. C: 10gb D: 10gb E: Remaining space. Try that. See if it works. Quote Link to comment Share on other sites More sharing options...
petitsam Posted January 6, 2012 Author Report Share Posted January 6, 2012 I installed win2000 sp4 installed all drivers too when installing A1 V2.0-0E-213 I got the message that the main unit is not a FRONTIER. forcing the installation i got " pathkey is illegal in initialfile" any suggestion, please? Quote Link to comment Share on other sites More sharing options...
petitsam Posted January 7, 2012 Author Report Share Posted January 7, 2012 sorry to re-open it in a new thread but it's an emergency on frontier 330 new main unit I installed win2000 sp4 installed all drivers too when installing A1 V2.0-0E-213 I got the message that the main unit is not a FRONTIER. forcing the installation i got " pathkey is illegal in initialfile" any suggestion, please? Quote Link to comment Share on other sites More sharing options...
petitsam Posted January 8, 2012 Author Report Share Posted January 8, 2012 :'(hi to all i've posted here hoping to have some help on changing the frontier 330 main control unit cause the old one is dammaged but i am surprised that no one could help. :'( Quote Link to comment Share on other sites More sharing options...
NeilT Posted January 9, 2012 Report Share Posted January 9, 2012 I have now merged your threads. Help here is given for free, if your problem/error is so big, please contact your local Fuji division for help. Quote Link to comment Share on other sites More sharing options...
petitsam Posted January 9, 2012 Author Report Share Posted January 9, 2012 Thanks for answering Quote Link to comment Share on other sites More sharing options...
hectoroki Posted January 9, 2012 Report Share Posted January 9, 2012 not sure if this applies.. but on a 350.. i was getting the pcdrive configuration error if the cd was not on drive N... but that is for NT.. not sure for your 2000 Also.. what SCSI does the 330 uses?? ... I am having problems reinstalling a 350 NT4 with the scsi comm.. the original motherboard crashed.. and is restarting.. but has communication with the scanner.. but the new pc.. cannot communicate... same scsi board Quote Link to comment Share on other sites More sharing options...
petitsam Posted January 10, 2012 Author Report Share Posted January 10, 2012 i wanted to know if someone had replaced the main control unit of a frontier 330 if yes i'll be grateful to know how as i have no way to consult a fuji technical. Quote Link to comment Share on other sites More sharing options...
Alexey_NK Posted February 3, 2012 Report Share Posted February 3, 2012 Make sure that the computer has 2 hard drives available. a C drive and D drive. Also, both of those drives need to be 10gb. If you are partitioning drives and have more than the total 20gb, set it up like this. C: 10gb D: 10gb E: Remaining space. Try that. See if it works. Thanks!!!! It work! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.