Jump to content

FRONTIER 370 ERROR E2623


Guest
 Share

Recommended Posts

Error message E2623  ( dryer section temperature abnormal heater turned off. consult your tecnical representative ) appears every time I want to print a photo with the minilab 370

I changed the thermostat and dryer ps3 without satisfaction

What to do?

Link to comment
Share on other sites

it seems I misstated my problem: the message E2623  ( dryer section temperature abnormal heater turned off. consult your tecnical representative )[face=Times][/face][face=Verdana][/face][face=Geneva][/face][face=Sans-Serif][/face][justify][/justify], however, appears all the temperatures are normal and no foreign body is found in the dryer! I have changed the thermostat, the heater without solution. There is no one to help me? No one has ever had this problem? the printer does not print. that can help me?

Link to comment
Share on other sites

E-2623 Dryer section

temperature

abnormal.

Heater

turned off.

Abnormal

dryer section

temperature

This error is detected during "5-second periodical check",

"Control range monitoring" or "pre-heat."

1. During "5-second periodical check":

This error occurs if the solution temperature in PS3/4 tank

is 0.5°C or lower while the solution temperature in another

tank is 10.0°C or higher.

2. During "Control range monitoring":

Dryer temperature is detected every one second. This

error occurs if the temperature goes outside the specified

range (setting temperature±15.0°C).

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...