flashmx Posted January 10, 2012 Report Share Posted January 10, 2012 when i start a printing new order i got lines on prints some times i got one line and some times i got more and after machine print some pics the lines disappear can any one help me and where i should search to fix this problem ,< i attach an image > Quote Link to comment Share on other sites More sharing options...
hectoroki Posted January 11, 2012 Report Share Posted January 11, 2012 is that a digital print?? or a negative print.. Quote Link to comment Share on other sites More sharing options...
bayro Posted January 12, 2012 Report Share Posted January 12, 2012 Probably your AOM driver has gone. Quote Link to comment Share on other sites More sharing options...
Minilab service Posted January 13, 2012 Report Share Posted January 13, 2012 It can be AOM driver. Switch G and B channels ( inputs and outputs ) on AOM driver and if you will have yellow line ( instead magenta ) that means AOM driver is faulty ( G channel ) . Then you have repair or replace AOM driver . Quote Link to comment Share on other sites More sharing options...
manager Posted January 19, 2012 Report Share Posted January 19, 2012 It could also be the region selection in windows, if you are working with MS Software. Go in Control Panel of windows and change location or just the decimal symbol from . to , Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.