kheus Posted July 15, 2009 Report Share Posted July 15, 2009 hello i have the following error in frontier 370 E 1423 I reinstalle the software and change the scsi cable but the error is not go thank s to help Quote Link to comment Share on other sites More sharing options...
hectoroki Posted January 9, 2012 Report Share Posted January 9, 2012 Did you ever fixed this problem/? and how??? Quote Link to comment Share on other sites More sharing options...
hectoroki Posted January 9, 2012 Report Share Posted January 9, 2012 Anyway.. i have a problem with a SP2000.. my main PC in the sp broke.. MB failure.. have to replace.. because it restarts every 5 minutes.. but the scsi board is working.. i can print a couple of pics before restart replaced with different machine.. but can't make the SCSI to work.. installed drivers.. cables?? well don't think so.. cause cables are working on the other pc... The A1 Software installation says there is no Printer communication.. ,.. checked the NT control panel.. and Board is there.. same drivers.. check devicesconnected to the board.. and i see the 7 fuji devices... Some driver.. something is missing and i can't find what.... any clues?? Quote Link to comment Share on other sites More sharing options...
sisir Posted January 15, 2012 Report Share Posted January 15, 2012 Some versions need Printer at ROM mode while installing software. Quote Link to comment Share on other sites More sharing options...
Vinay Posted October 19, 2015 Report Share Posted October 19, 2015 Hello friends, Please hlep I have the same problem and I have reinstalled the sofware 3 time aleady but no use... PLease help... @Sisir can you please make me understand what is ROM mode? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.