PCChen Posted November 7, 2011 Report Share Posted November 7, 2011 Hello all, I just received SP-3000 recently. But found it without any option to do scanning in its software interface after powered on. Refer to the Fuji manual, there should be a "Print/Export" options for opening the software interface for scanning. I guess there are some software modules missing in the MCU. Could you suggest what software do I need to make the scanning option available? Thank you so much. warpdrive 1 Quote Link to comment Share on other sites More sharing options...
PCChen Posted November 8, 2011 Author Report Share Posted November 8, 2011 Hello all, I solved the problem by enable the file I/O: Now "Pre-operation Check" and "Print/Export" will appear in the interface. I think very few people would have this problem unless you plan to use SP-3000 as a stand alone scanner without printer. Just in case anyone would be benefit from this. Cheers~ pc chen warpdrive 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.