randy Posted August 4, 2011 Report Share Posted August 4, 2011 Hello, The manual is not much help, this appears this appears to be a laser problem, I can not find a sos issue anywhere in the manual, the fuses fc01 thru fc08 are not blown & no loose or bad connections can anyone help? Quote Link to comment Share on other sites More sharing options...
sisir Posted August 4, 2011 Report Share Posted August 4, 2011 Please check the AOM drives and Laser with another good one. I think the AOM drive is not working wel. Quote Link to comment Share on other sites More sharing options...
Minilab service Posted August 4, 2011 Report Share Posted August 4, 2011 Hi. The first try swap AOM driver inputs and outputs ( B channel withG channel ). If after that error disappear, but blue will be problem in blue channel than AOM driver will be defected. Then you have to change or repair AOM driver. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.