Jump to content

MULTI DIC FUJI C4/C5


logan2111

Recommended Posts

Hi

   The procedure for win2000 and win-xp are same. The procedure is

Install C4C5 on client as a client.

Restart the computer.

Exit F-DIA application.

Safe patch file in D drive.

Press Start-Run-Brows-open D drive

select D:/dicup.bat

now you have to write FRONTEND in front of D:/dicup.bat

Press enter

Press any key to continue

after few minute again

Press any key to continue

Restart computer

Regards

ABDUL QUDDUS

Link to comment
Share on other sites

You should also edit the dicup because in line 5 of the program appears dicup drive letter to use: cd / d N:\ where N is the drive which runs the dicup. In the line that is labeled ":inicopy" displays the command: copy /y N:\changer.ini c:\F-DIA\ and again N is the drive which runs the dicup. I had to change these two instructions because it gave me an error when installing the dicup, not if you have the same error. Save your changes and run the path: N:\dicup.bat FRONTEND

Link to comment
Share on other sites

sorry ABDUL i don't understand when you say i don't have any option ??

please give me step by step the detailed procedure to instal the patch!!!! with the message of the member "Servitel" the installation seems to me not at all clear! and last question what is easy SCSI? where i can found it?

Link to comment
Share on other sites

  • 1 year later...

Hello,

Our "FUJI FRONTIER 330 SLP 800SC" have printing machine.

Frontend server installed on windows 2000.

We would like to set up Windows 2000 software uninstall windows xp.

A computer with Windows XP installed for the trial, "the MSDE and FDI," I installed the software but the device out of "FUJI FRONTIER 330 SLP 800-SC" printing machine software does not seem to FDI.

How can these settings.

Thanks in advance for your help

E-MAİL: xbaydostx(@)hotmail.com

(e-mail at no brackets)

=====================================

TURKISH :

Merhaba,

Bizim "FUJI FRONTIER 330 SLP 800SC" baskı makinası var.

Frontend sunucuda windows 2000 yüklü.

Biz windows 2000 yazılımı kaldırıp windows xp kurmak istiyoruz.

Deneme için Windows Xp  kurulu olan bir bilgisayara "MSDE ve FDI" Yazılımı kurduk ancak out device "FUJI FRONTIER 330 SLP 800-SC" baskı makinamız FDI yazılımda görünmüyor.

Bu ayarları nasıl yapabiliriz.

Yardımlarınız için şimdiden teşekkürler.

E-MAİL: xbaydostx(@)hotmail.com

( mail adresinde pazantezler yok )

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...