Roneakins Posted April 27, 2010 Report Share Posted April 27, 2010 I have just upgraded a computer to run C4/C5 ver 5.5. Finally the install worked and can communicate with frontier and kiosks for printing only. I also got an upgrade C4/C5 SP6 Ver.5.5-OE-960. This is supposed to allow me to use an external usb cd burner, rather than the scssi plextor that has been used in the past. However when I try and install it goes about half way and gives an error (installation error 1905, copying files failed, Installation cancelled) Any ideas? My theory is that perhaps I have a bad disc. Any help would be greatly appreciated. Ron Quote Link to comment Share on other sites More sharing options...
thiago.hdp Posted April 28, 2010 Report Share Posted April 28, 2010 try to copy the instalation to the Hard Disk before installing. If is bad disc, this will resolve OR make you sure that the problem is the disc (in the case of error messages when copying). Quote Link to comment Share on other sites More sharing options...
Roneakins Posted April 29, 2010 Author Report Share Posted April 29, 2010 That WORKED!!!!!! You are a ******* genius. It took 3 attempts on 2 different computers but it finnaly copied complete. I then burnt to a cd and installed on my new DI and worked like a charm. I now use a non SCISSI burner. All Is well. THANKS SO MUCH!! Quote Link to comment Share on other sites More sharing options...
jackie233 Posted April 29, 2010 Report Share Posted April 29, 2010 Hi Ron, Can you share the patches? My Plextor can't work anymore. I also want to use SATA/IDE burner. Thanks. Quote Link to comment Share on other sites More sharing options...
Roneakins Posted April 29, 2010 Author Report Share Posted April 29, 2010 With the patch you must still use an external burner. It will not work for an internal drive. Quote Link to comment Share on other sites More sharing options...
jamalpavel Posted December 3, 2010 Report Share Posted December 3, 2010 send me the software please thanks Quote Link to comment Share on other sites More sharing options...
Bunny Posted December 5, 2010 Report Share Posted December 5, 2010 Hello can I also get a copy of the patch please? bunny@diepunt.com Thanks Quote Link to comment Share on other sites More sharing options...
Sebahattin Posted July 9, 2011 Report Share Posted July 9, 2011 Hello, Our "FUJI FRONTIER 330 SLP 800SC" have printing machine. Frontend server installed on windows 2000. We would like to set up Windows 2000 software uninstall windows xp. A computer with Windows XP installed for the trial, "the MSDE and FDI," I installed the software but the device out of "FUJI FRONTIER 330 SLP 800-SC" printing machine software does not seem to FDI. How can these settings. Thanks in advance for your help E-MAİL: xbaydostx(@)hotmail.com (e-mail at no brackets) ===================================== TURKISH : Merhaba, Bizim "FUJI FRONTIER 330 SLP 800SC" baskı makinası var. Frontend sunucuda windows 2000 yüklü. Biz windows 2000 yazılımı kaldırıp windows xp kurmak istiyoruz. Deneme için Windows Xp kurulu olan bir bilgisayara "MSDE ve FDI" Yazılımı kurduk ancak out device "FUJI FRONTIER 330 SLP 800-SC" baskı makinamız FDI yazılımda görünmüyor. Bu ayarları nasıl yapabiliriz. Yardımlarınız için şimdiden teşekkürler. E-MAİL: xbaydostx(@)hotmail.com ( mail adresinde pazantezler yok ) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.