C4/C5 work's slowly

[Sanchez]

Hi all.

The program C4/C5 ver.5.5-OE953K is converting the images and checking device services very slowly. I think that this should not be.

Can you give me some advice.

Thanks in advance.

[srrrahim]

install S2  OR  make FMPC

[sisir]

Check your Windows version. C4-C5 needs Service Pack 2 or updated of Windows 2000. Have you installed it?

[Sanchez]

C4/C5 installed on XP.

The problem was solved. I set the priority of processes(HIGH), which are associated with program C4/C5. And set for ConvServices(ConvServ1, ConvServ2) compatibility mode(Windows 98).

Thanks for help.

[Sebahattin]

Hello,

Our "FUJI FRONTIER 330 SLP 800SC" have printing machine.

Frontend server installed on windows 2000.

We would like to set up Windows 2000 software uninstall windows xp.

A computer with Windows XP installed for the trial, "the MSDE and FDI," I installed the software but the device out of "FUJI FRONTIER 330 SLP 800-SC" printing machine software does not seem to FDI.

How can these settings.

Thanks in advance for your help

E-MAİL: xbaydostx(@)hotmail.com

(e-mail at no brackets)

=====================================

TURKISH :

Merhaba,

Bizim "FUJI FRONTIER 330 SLP 800SC" baskı makinası var.

Frontend sunucuda windows 2000 yüklü.

Biz windows 2000 yazılımı kaldırıp windows xp kurmak istiyoruz.

Deneme için Windows Xp  kurulu olan bir bilgisayara "MSDE ve FDI" Yazılımı kurduk ancak out device "FUJI FRONTIER 330 SLP 800-SC" baskı makinamız FDI yazılımda görünmüyor.

Bu ayarları nasıl yapabiliriz.

Yardımlarınız için şimdiden teşekkürler.

E-MAİL: xbaydostx(@)hotmail.com

( mail adresinde pazantezler yok )