Jump to content

Frontier 350 rewinds too much


white06lacrossecxs

Recommended Posts

Im having a strange recurring problem on my 350. With my 102mm paper sometimes when I load the magazine into the machine ill get a Jam error at the magazine. Ill open the magazaine in the darkroom and find that the paper has rewound beyond the feed rollers. Tried swapping the magazine, helped a bit but still does it sometimes. It only does it after being used on the top paper deck.

Link to comment
Share on other sites

There is a rewind tab on the magazine that lets the machine know how far to rewind it.

On the cutter near the back end of it there is a sensor that corresponds to the rewind tab of the magazine and is used for detecting it.

One of these may be damaged or out of alignment with the other.

Your feed belt in the back may also be off one of the rollers/pulleys.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...