husseinatoz Posted April 27, 2011 Report Share Posted April 27, 2011 i have a fuji frontier 570 and a week ago, while i was printing, the paper started coming out blank. then, i turned off the machine and turned it back on and it wouldnt start up. the screen on the 570 printer shows just the frontier logo and wont proceed any further. sometimes its just a black screen. i then tried to reinstall the software and reinstall the software onto the ram. it wont work. any suggestions? i'm using after market firewire cables and some people tell me that was the problem. but apparently its not. please help. Thanks Quote Link to comment Share on other sites More sharing options...
DanielM Posted May 2, 2011 Report Share Posted May 2, 2011 If its freezing with the Frontier logo and 8 dots on the display, you may have a possible problem with the CTL23 PCB. Check the plug connections, trips, etc. Otherwise will have to replace the PCB and reload the software. Quote Link to comment Share on other sites More sharing options...
barsheed Posted May 2, 2011 Report Share Posted May 2, 2011 The problem from RAM. Try to check the Ram Quote Link to comment Share on other sites More sharing options...
sisir Posted May 5, 2011 Report Share Posted May 5, 2011 Just check the RAM in Image processing box and LDD23 PCB if it is loose contact. Quote Link to comment Share on other sites More sharing options...
hassan Posted May 8, 2011 Report Share Posted May 8, 2011 i had this problem .... i just reset its CTL23 pcb with the reseter placed on it . and after that my machine was working fine .... Quote Link to comment Share on other sites More sharing options...
cuntek Posted November 27, 2019 Report Share Posted November 27, 2019 halo,i have same problem,can u explain how resetter placed on it??? how reset ctl23? Quote Link to comment Share on other sites More sharing options...
Minilab service Posted November 27, 2019 Report Share Posted November 27, 2019 To reset press "Reset" button on CTL23. 8 dots can see, when many boards doesn't work properly. Can be CTL23, LDD23, GPR23, RAM and other boards inside image box. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.