hqv Posted March 1, 2011 Report Share Posted March 1, 2011 Hi all! Please help me with error on Fuji Frontier 370 as follow: "E-2109 Communication error occurred between FMPC & printer". When this error appearance, i checked: 1. connect the Printer 1394 cable to FMPC’s Card. 2. Check 1394 Card in FMPC still existed in Device Manager. 3. see printer’s basic screen say “initializing, warming up or stand by”. All normal activities but errors still appear. Please help me to solve this problem! Quote Link to comment Share on other sites More sharing options...
ghn5ue Posted March 1, 2011 Report Share Posted March 1, 2011 When we get this error, restarting the FMPC computer usually fixes it. On rare occasions I have also had to shut down the printer and restart it as well. everQuestion 1 Quote Link to comment Share on other sites More sharing options...
hqv Posted March 2, 2011 Author Report Share Posted March 2, 2011 Thanks ghn5ue! I did it but this error still occurre. Do you difference advice for me? everQuestion 1 Quote Link to comment Share on other sites More sharing options...
ghn5ue Posted March 2, 2011 Report Share Posted March 2, 2011 Is this a new install of an FMPC or was this system working before the error came up? Quote Link to comment Share on other sites More sharing options...
hqv Posted March 3, 2011 Author Report Share Posted March 3, 2011 This isn't a new install of an FMPC and this system was working good before the error appear , please help me! Thanks a lot! Quote Link to comment Share on other sites More sharing options...
Roma Posted March 3, 2011 Report Share Posted March 3, 2011 Check FMA20 PCB in printer. Quote Link to comment Share on other sites More sharing options...
ghn5ue Posted March 3, 2011 Report Share Posted March 3, 2011 You should also check the firewire cable at both ends to make sure it is plugged in securely (you will have to take the back panel off of the printer to get at it). Quote Link to comment Share on other sites More sharing options...
hqv Posted March 4, 2011 Author Report Share Posted March 4, 2011 Thanks all! I will try your guide Quote Link to comment Share on other sites More sharing options...
pietre48 Posted March 22, 2011 Report Share Posted March 22, 2011 hello hqv,your firewire cable mustnot be more then 5mtr,if so replase firewire card in FMPC and reload fmpc program in FMPC.greetings P. Quote Link to comment Share on other sites More sharing options...
Singh photo lab Posted September 28, 2019 Report Share Posted September 28, 2019 error no 2101 in frontier 370 Quote Link to comment Share on other sites More sharing options...
Minilab service Posted September 30, 2019 Report Share Posted September 30, 2019 Which error you have on your Frontier 370? Is it X-2101 on your minilab screen, or error 2101 on server, where installed C4/C5 software. X-2101 means undefined error occured. If you get 2101 error on server running C4/C5 software then the additional data directory is not built correctly. Reinstall the writing service software to fix this problem. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.