servitel Posted August 21, 2010 Report Share Posted August 21, 2010 Greetings friends of the forum this week, our frontier 7700 presented a paper jam problem 6" on the feed unit 1, we observed that the right arm receives the paper at random, sometimes they get it, but in others it receives further back in the position they should, then, to take it to the drive unit 2, can not deliver and returns to the role even in the arm. This only occurs on the role of 6" as for the other sizes do not look at this problem because they act both arms. Reinstall the server software, clean the sensors, and observed the same problem. The last thing we did was swap the sensor from that arm on the other located elsewhere on the Frontier, the problem was solved in part, because the jam continues but in a less continuous. Thanks. Quote Link to comment Share on other sites More sharing options...
FRANKJV Posted March 19, 2011 Report Share Posted March 19, 2011 you can solved this problem? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.