ABDUL QUDDUS Posted January 22, 2011 Report Share Posted January 22, 2011 Hi, I am getting an error E-2513 (G laser temprature out of specified range) on one of our FR340 only in morning time. It takes long time (almost 5 to 6 hours) to get ready but once its ready then no problem to print. Just four months before laser had been chenged with refurbished one.All nessesory action has been taken but no use. your help would be highly appriciated. Regards ABDUL QUDDUS Quote Link to comment Share on other sites More sharing options...
ABDUL QUDDUS Posted January 25, 2011 Author Report Share Posted January 25, 2011 Hi Still i am waiting for any help so far no reply. Thanks ABDUL QUDDUS Quote Link to comment Share on other sites More sharing options...
yustas Posted January 26, 2011 Report Share Posted January 26, 2011 Dear Abdul, Why not to ask your laser refurbishing company about this issue? They MUST support you at any time I think... If they took your money and do not want to have widely known bad feed back form you in Internet- they will help you. Quote Link to comment Share on other sites More sharing options...
ABDUL QUDDUS Posted January 29, 2011 Author Report Share Posted January 29, 2011 Dear yustas Thankyou very much for your kind information. Best regards ABDUL QUDDUS Quote Link to comment Share on other sites More sharing options...
manager Posted March 17, 2011 Report Share Posted March 17, 2011 Hi, Abdul, you seam to be a very good technician, so I maybe give you an advice that you already know: have you tried to enter Setup Menu with password miya and change current and temperature of G laser? Quote Link to comment Share on other sites More sharing options...
sisir Posted March 17, 2011 Report Share Posted March 17, 2011 I think the laser is broken again. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.