Jump to content

MS01 install is not end


Mahmod
 Share

Recommended Posts

my minilab is working Minilab A1 ver4.0 with DI C4/C5.

i installed MS01 Ver2.5 to minilab. ok.

after i want to install ver3.0 , it is not install and error is MS01 3.0 is not compatible with this version of the Microsoft Windows operating system. Install will now abort

i install windows xp sp2 + MS01 3.0 + MS16 to DI

now Minilab isn't connecting with DI

error is Connection to the imaging controller failed.

what must i do?

Link to comment
Share on other sites

ok the problem is because you want to install as the AI software is running, put the cd inside reboot and it will start..if software does not start, turn off machine completely and as soon as the you see that is about to start hold on the CTRL key to maintain the AI software from starting then you can install.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...