allanson Posted February 23, 2011 Report Share Posted February 23, 2011 fuji 340 we changed the cpu for the fuji 340 and they it came with new software, however the imaging controller can nolonger connect with the printer it gave a message that " check network connection" and when you check in network places the shared files from the 340 printer CPU of fe-ezpc00 are no longer seen, so pliz i need your help guys. thanks in advance Quote Link to comment Share on other sites More sharing options...
Bri Posted February 23, 2011 Report Share Posted February 23, 2011 they probably need to be set up again in a network work group. You may also want to try and Ping one machine from the other to make sure that there is no IP conflict. Quote Link to comment Share on other sites More sharing options...
pepe21 Posted February 23, 2011 Report Share Posted February 23, 2011 I am sure that they will ping each other, make sure they are on the same workgroup or micsgroup, also what new software did it came with? because if so you may need to update our PIC. if you have PIC 2.6 software and on the 340 3.0 A1 all you would need is the PIC lite to put the name of server(PIC) but if you are using MS01 that is totally different. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.