Jump to content

Frontier 340 - W-1277


jerkan
 Share

Recommended Posts

W-1277 : LED light amount adjustment not done. Perform the LED light amount adjustment in “ Setup and Maintenance ” – “ 03. Scanner Adjustment / Maintenance ”.

1.The LED light amount is not adjusted. Perform the adjustments in the order of “LED Light Amount

Adjustment (0351)” and “Spectral Calibration ( 0348 ) .”

2. Foreign matter is caught in the carrier. Remove the foreign matter.

3. Faulty LED. Replace the LED.

4. Malfunction of the CCD shutter. Replace the CCD unit.

Link to comment
Share on other sites

The FD is machine spicific. Loading one from another machine will get the software to load, but you'll still have many issues. If you have the original FD that shipped with the machine, that will work. There is also a piece of paper with adjustment settings that ships with the machine. You can manually enter these numbers in the correct menus.

Link to comment
Share on other sites

hi

LED light amount adjustment

not done.

Perform the LED light amount

adjustment in “ 3. Scanner

Adjustment / Maintenance ” in

“ 4. Setup and Maintenance ”.

The table used to adjust the LED light

amount is unavailable.

(Causes of the error message)

1.The LED light amount is not adjusted.

2. Foreign matter is caught in the carrier.

3. Faulty LED

4. Malfunction of the CCD shutter

1. Perform the adjustments in the order

of “LED Light Amount Adjustment

(43L)” and “Spectral Calibration (43J).”

2. Remove the foreign matter.

3. Replace the LED.

4. Replace the CCD unit.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...