Jump to content

Frontier 350 Problem of connection Scanner to S2


Recommended Posts

Hello everybody!! i have a big problem i cant print from fe-frontend the option is not activated i have a FRONTIER 350 with A1 VER 7.7 and i can't connect the S2 server!! yet all the procedures were strictly complied!!  is somebody have a frontier 350 with the FE installed can help me please ?

this is the service menu than i have :

Link to comment
Share on other sites

Hello Nabil,

First you have to make pre.op.check from Frontier and select the Connect to ima. contr.

If SP2000 connects to FE-Frontend without any problem;

Put S2 cd on FE-Frontend and open tools (Fe software must be open),Legacy conf. tool,and double click to batch.

Select SP2000 next Without FMPC next write to scanner name EZPC00 and next then restart everything.

When start up before you open the printing page on FE-Frontend you have to connect via SP2000 (pre.op.check)

It must work.

(I think you installed S2 cd on SP2000)


Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...