mfvster Posted July 13, 2010 Report Share Posted July 13, 2010 machine frontier 350 when i do the set up print coming without yellow line. theres no any error coming . i check with another machine replacing lasser unit same problem coming thats mean problem in the lasser so please any one give me some instruction to solve this problem. thanks i attach setup print also Quote Link to comment Share on other sites More sharing options...
tolik197 Posted July 13, 2010 Report Share Posted July 13, 2010 beside you faulty driver AOM. they are situated behind machines for lazer and distributor section Quote Link to comment Share on other sites More sharing options...
mfvster Posted July 13, 2010 Author Report Share Posted July 13, 2010 i checked laser unit with another machine(working machine ) that machine AOM working properly so how can i think that is AOM driver . is there any reset setting there laser? Quote Link to comment Share on other sites More sharing options...
tolik197 Posted July 13, 2010 Report Share Posted July 13, 2010 There is no it not so. On frontier 350 very seldom but fail AOM driver. Try to connect all three drivers or to connect on other frontier Quote Link to comment Share on other sites More sharing options...
Kevbo37 Posted July 13, 2010 Report Share Posted July 13, 2010 Do I understand correctly that you placed the laser unit from the affected machine into another frontier and the problem is the same? Obviously this is a laser unit issue. Can you send a screen shot of the "exposure check" screen? This will help to determine if it is a laser gun or an AOM inside the laser unit. Also if you can send a screen shot of the "Blue laser I/O" screen it would also help. log in under "xx" and use password "miya" to get to these screens. Quote Link to comment Share on other sites More sharing options...
sisir Posted July 19, 2010 Report Share Posted July 19, 2010 Is there any error message? Please send me the screen print of "Laser Expouser Check". Enter in "Laser Expouser Check" and wait for 10 minutes, is there any error message? Send me the above information. I can help you. Quote Link to comment Share on other sites More sharing options...
mfvster Posted July 20, 2010 Author Report Share Posted July 20, 2010 now machine working properly without any error thank u asking me to help i finally i adjusted the laser valiu and its worked thank you agan Quote Link to comment Share on other sites More sharing options...
ABDUL QUDDUS Posted July 21, 2010 Report Share Posted July 21, 2010 Hi Can you give me a bit detail of your setting what you did. Thanks in advance ABDUL QUDDUS Quote Link to comment Share on other sites More sharing options...
azfoto Posted February 9, 2011 Report Share Posted February 9, 2011 now machine working properly without any error thank u asking me to help i finally i adjusted the laser valiu and its worked thank you agan Hello, I have exactly the same problem as you, missing yellow stripe with no errors, can you please let me know what values have you changed? Thank you in advance, Bartek Quote Link to comment Share on other sites More sharing options...
azfoto Posted February 12, 2011 Report Share Posted February 12, 2011 Problem solved afrer repairing AOM Driver Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.