FRANKJV Posted December 3, 2010 Report Share Posted December 3, 2010 hello, I have a Frontier 7500, the error 5552-5 present continously, the prints of 12inch dont output in print receiving tray large, and jamin dryer. check the solenoid and functions ok, anybody helpme? thanks in advance. Quote Link to comment Share on other sites More sharing options...
Christina Rose Posted December 3, 2010 Report Share Posted December 3, 2010 if solenoid works normal it could be problem with rollers or the guide plate which guide the large prints to the bottom tray. Quote Link to comment Share on other sites More sharing options...
FRANKJV Posted December 3, 2010 Author Report Share Posted December 3, 2010 thaks christina, the ROLLERS ARE OK. another sugestions? Quote Link to comment Share on other sites More sharing options...
Christina Rose Posted December 4, 2010 Report Share Posted December 4, 2010 check maintenance menu any option has set improper? is it possible to see the dryer operation without dryer cover? Quote Link to comment Share on other sites More sharing options...
Dave S Posted December 4, 2010 Report Share Posted December 4, 2010 Clean the lane select sensor which is roughly in the centre of the dryer rack. Clean both halves of the sensor. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.