fuji 330 no on

[sam5246]

hi dear

i have fuji330 minilab,

but this time have a main fault,i can't guees these fault,my machine no on i check the power supply only alpha 600 output volteg

slot 5 5v

slot 4 5v

slot 3 24v

if you know,then

help me

Thanks

[asagi77]

Hi Sam how are you

Check the connector # 3 which is going to CTL board

[PRASANNA PHOTO TEC]

hi

alpha 600 its simple,  frist do check the power supply   have some FAN , its working nomal? and check the power out puts are nomal?  i meen all out puts  need   mention volt,  so all are ok we can  trust 600 is ok, then you have to go  CTL , check point have mention volt, also some led need to lit, please check frist

[sam5246]

hi all

i properly chek the power supplyalpha 600

and i chek all connector of the CTL board but no volt find,

[PRASANNA PHOTO TEC]

ok  

you said 600 you check, what you said "the CTL board but no volt find,"

ctl no have any volts?

CTL HAVE CHECK POIT , 5V, 24V , 12V  ALSO HAVE led ,  PLEASE MENTION  clealy

may be 600 is on , how abot 600 out put? 5v.12v, 24v exct  have or not?

[sam5246]

i change alpha 400 and machine on but processor unit not working

erre

comunication error betwean scanner and printer processor

[PRASANNA PHOTO TEC]

after machine start up  all the power  comming?

you have power unit 600 and 400?

your machine fr  330  , so we need more infor for help you

day by day you said little bit

[sam5246]

hi dear

i check all the conector but all supply ok

LDD 1 contector supply no coming,Pwr22 supply board 2 relay 24 v and 1 relay 5 v no on