prestigesolihull Posted December 2, 2010 Report Share Posted December 2, 2010 Hi All I hope someone can help me. Out Frontier 350 is having startup problems giving an error message as follows E-2615 P2 processing tank not rising Any ideas? TIA Jim Quote Link to comment Share on other sites More sharing options...
nash Posted December 2, 2010 Report Share Posted December 2, 2010 first take out the filter first and see if it rises Quote Link to comment Share on other sites More sharing options...
theberah Posted December 2, 2010 Report Share Posted December 2, 2010 Yes take out the filter & wash it.Check if there is circulation in the sub-tank.Also take out thermostat & clean it. Quote Link to comment Share on other sites More sharing options...
prestigesolihull Posted December 3, 2010 Author Report Share Posted December 3, 2010 Thanks Both Tried both of those, no joy so far. Also drained and refilled the P2 tank. Kindest regards Jim Quote Link to comment Share on other sites More sharing options...
nash Posted December 3, 2010 Report Share Posted December 3, 2010 Jim then the problem is the ssr relay on the pacboard behind the sorter section Quote Link to comment Share on other sites More sharing options...
PRASANNA PHOTO TEC Posted December 3, 2010 Report Share Posted December 3, 2010 hi the problam is PAC 20 pcb, SSR no 4, frist u exchange wire H 710 TO H 711 and H711 to H710 see BL tank temp rice then replace SSR or PCB PRASANNA SRI-LANKA Quote Link to comment Share on other sites More sharing options...
sisir Posted December 3, 2010 Report Share Posted December 3, 2010 This is a common problem of PAC20 PCB. You should replace SSR4 (Solid State Relay) with new one. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.