MALACAL Posted November 6, 2010 Report Share Posted November 6, 2010 DEAR FRIENDS WE INSTALL THE MS V3 MFPC PROGRAM AND IN THE COMPUTER THAT IS SHOW AN ERROR "DNS ERROR" BUT ONLY WHEN WE TRY TO ACCES TO MANINTENACE MENU FOR EXAMPLE WHEN WE SEND THE CALIBRATION PAPER. HAVE ANY IDEA ABOUT THGIS PROBLEM THANK FOR YOUR HELP BEST REGARDS. Quote Link to comment Share on other sites More sharing options...
sisir Posted November 7, 2010 Report Share Posted November 7, 2010 I dont have MS, but I installed D20 (FMPC) and faced such type of problem, while Mr. Takeshi Masuyama was Technical Advisor of Singapore Asia region. He suggested me to disable the SP side Network (Firewire Card) and the problem disappeared. Quote Link to comment Share on other sites More sharing options...
bruno225 Posted November 8, 2010 Report Share Posted November 8, 2010 Hi, For DNS error message, you have two way. First to check if you have an ip address to IEEE1394 of LP and for SP disable the SP side Network (Firewire Card) After that normally is OK Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.