Jump to content

MS not printing on all sizes of Frontier 340


Recommended Posts

You might have to manually route them. I have problems with some print sizes causing errors when printed through the tethered interface to my 330, but the same sizes print fine through Panda on the FMPC for the 370.  Never figured out how to solve this unfortunaly..  Are you getting an error message on your 340 when printing these sizes?

Link to comment
Share on other sites

On the main MS01 screen, click the MS01 icon on the bottom left.  In the window that opens up, there is a tab called routing. In there you will see a list of print sizes and to what paper and or printer they are routed to.  You can make changes here.  Everytime you create a new print size in MS01, you need to press the analyze button which automatically sets up the routing.  If you have made changes previous to this, you will need to make them again.  

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...