Jump to content

frontier 550 proceesor not booting


rohit_satyam123
 Share

Recommended Posts

  • 5 years later...

Clear the GPR23 battery by flicking the ON/OFF switch on the GPR23 card.

Check the ATX23 (thin board in the GMB Box) and make sure you have all 4 LEDs lit.

Check Device Manager on the PC and make sure you it sees the printer.

 

But it depend on how many dots there are.  3 dots I believe that it has transferred data from the CTL to the GMC, the remaining dots are to do with the other boards and the LDD23.  If the LDD23 is at fault, it would error.

Link to comment
Share on other sites

  • 4 weeks later...
  • 2 weeks later...
  • 1 year later...
  • 1 year later...
  • 4 months later...
  • 2 weeks later...
  • 1 month later...
  • 9 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...