Jump to content

Frontier 370 replenisher problems


SWZENOR
 Share

Recommended Posts

I am having a problem with my replenisher and error codes.    It's seems to be a problem with the P1-R.   The float in the back always has a hard time staying up.   I have replaced the float, the sensor, the cylinoid, etc.    In the manual it says to Check 415....does anyone have a clue what that means?

We are burning through the chemistry trying to solve the problem....thoughts?

Thanks in Advance...

Scott

Link to comment
Share on other sites

since you don't give any error codes it is hard to guess your problems. But having said that, one guess on what "check 415" could mean are:

4 = Setup and Maintenance (log in with SE2 and 7777)

1 = System Operation Setup and Check

5 = Error Information Check

You are asked to check the error log.

regards

  

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...